Main Camera Copper & Main Camera Film - Sony XPeria ST25i Working Instructions

Replacement
4.15 Main Camera Copper & Main Camera Film
Follow the 3.1 – 3.4 Disassembly instructions!
Follow the 4.14 Removal instructions!
Carry out the Removal as described below.
Prepare the new Main Camera Copper & Main Camera Film.
Carry out the Installation as described below.
Follow the 4.14 Installation instructions!
Follow the 5.2 – 5.5 Reassembly instructions!
REMOVAL
Peel off the Main Camera Copper from three sides as shown
in the picture.
Scrap! Not to be reused!
Peel off the Main Camera Film.
Scrap! Not to be reused!
INSTALLATION
Place a new Main Camera Film in the upper middle position
to cover two soldering pads.
Using Main Camera Film to cover two soldering Pads.
Both kinds of Main Camera type from two suppliers are
all needed to add this Main Camera Film at this upper
middle position.
1263-4086 Rev 6
© Sony Mobile Communications AB – Company Internal
Working Instruction Repair Instruction Mechanical
36(53)