Panasonic TH-50PB2W Operating Instructions Manual page 12

Network Setup
3
Select [Save] and press
Save the current network settings.
Default settings of [M-DIRECT]
The following settings as [M-DIRECT] in the [Wireless LAN] are set before the Display leaves the factory.
IP address
Subnet mask
SSID
Channel
Key
•
The authentication method is WPA2-PSK, and the encryption method is AES. Both methods are xed.
•
When you need to change initial con guration of [M-DIRECT], please contact your network administrator.
•
Make sure the initial Key is changed for safety.
•
As the DHCP server is already functioning, select [ON] before connecting a computer.
Con guration of Wireless LAN [USER1] - [USER3]
1
Select [USER1] – [USER3] for [Wireless LAN].
Wireless LAN
Save
Wireless LAN
Name Change
DHCP
IP address
Subnet mask
Gateway
SSID
Mode
2
Set [DHCP].
When [Off] is selected, IP address and other settings can be set manually.
Name Change
DHCP
(DHCP client function)
IP address
(Display of IP address and setting)
Subnet mask
(Displaying and setting the subnet
mask)
Gateway
(Display of gateway address and
setting)
•
If [DHCP] is set to [On], the IP address and other items are not displayed. Check the [Status] page for the current
IP address and other items. (See page 17)
•
Before using the DHCP server, make sure the DHCP server is already functioning.
•
For details of IP address, subnet mask, and gateway, ask the network administrator.
•
A wired LAN and wireless LAN cannot be used in the same segment.
12
button.
192.168.12.100
255.255.255.0
M-DIRECT + The last 4 digits of the Display ID
1
The same string as the SSID
Address settings
1
USER1
2
Off
3
192.168. 10. 100
4
255.255.255. 0
192.168. 0. 1
Pressing
AD HOC
You can change the user name. Entering characters
On: If a DHCP server exists in the network to which the display is
connected, the IP address will automatically be acquired.
Off: If a DHCP server does not exist in the network to which the
display is connected, additionally set [IP address], [Subnet mask]
and [Gateway].
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Select the item and press
IP address
I
192.168. 0. 8
Use to select a digit.
Use to change a number.
Press .
will cancel the address change.
.
page 15