Controlling Jobs Without An Océ Job Ticket - Oce VarioPrint 1055 Configuration And Maintenance Manual

Controlling jobs without an Océ job ticket
Controlling jobs without an Océ job ticket
Introduction
If a user does not have a printer driver that is supported by Océ, the special Océ print
features are not displayed. The generated print file does not include an Océ job
ticket. The Océ VarioPrint
features through the operator panel. Therefore, the print job must become a mailbox
job.
You can instruct the Océ VarioPrint
ticket to the mailbox.
Before you begin
Enter the Key operator system
page 32).
Illustration
[68]
[68] Sending All Jobs Without an Océ Ticket to the Mailbox
Controlling jobs without an Océ ticket
Press the 'Print settings' key.
1.
Select the 'Job processing' tab.
2.
Press the 'Jobs without Océ ticket' key to select 'Mailbox' or 'Automatic'.
3.
Check
Quit the key operator system.
1.
To check the selection: start a print job with a generic printer driver.
2.
92 Chapter 11 The print and scan mode of the Network Printer
®
1055/65/75 allows the user to control the Océ job
®
1055/65/75 to send all jobs without an Océ job
(see 'Enter or quit the key operator system' on