Using Call Back; Chain Dialing Fromm; Emory - GE Feb-74 User Manual

U C B
SING ALL
Call Back is used to automatically dial a number stored in
memory.
1. Make sure the phone is OFF by pressing the PHONE or
SPEAKER button.
2. Press MEMORY.
3. Use the arrow buttons to scroll through the numbers stored
in memory and press CALL BACK when you reach the
desired number.
C D
HAIN IALING FROM
Use this feature to make calls that require a sequence of numbers, such as
a calling card number used for a frequently called long distance number.
The following example shows how you can store each part of the long
dialing sequence and use chain dialing to make a call through a long
distance service:
The Number For
Long distance access number
Authorization code
Frequently called long distance number
1. Make sure the phone is ON.
2. Press MEMORY and then press 7.
3. When you hear the access tone, press MEMORY and then press 8.
4. At the next access tone, press MEMORY and then 9.
TIP: Wait for the access tones before pressing the next memory button or
your call might not go through.
24
ACK
M

EMORY

Memory Location
7
8
9
CALL BACK