Install The Usb Driver (Mac Os X) - Roland Studio-Capture Amplifier Owner's Manual

Install the USB Driver (Mac OS X)

1.
Connect the AC adaptor (p . 10) .
2.
Start up the computer without the STUDIO-CAPTURE connected .
Exit all applications that are running .
3.
Insert the included "STUDIO-CAPTURE Driver CD-ROM" into the DVD-ROM drive .
4.
Double-click the [StudioCapture_USBDriver] icon in the [MacDriver] folder on the
CD-ROM .
The installer starts .
If a dialog box requesting a password appears during installation, enter a computer
administrator's user name and password and click the [Install Software] button or [OK] button .
5.
Follow the instructions on the screen and install the software .
5-1 .
When "Welcome to the STUDIO-CAPTURE Driver installer" appears, click the [Continue]
button .
5-2 .
If the screen for selecting the installation destination appears, select the startup disk and
click the [Continue] button .
5-3 .
When the installation type appears, click the [Install] button or [Upgrade] button .
5-4 .
Click the [Continue Installation] button in the next screen .
5-5 .
When installation has finished, click the [Restart] button .
6.
Once your computer has started, use a USB cable to connect the STUDIO-CAPTURE
to the computer, and then hold down the [
turn on the power .
MEMO
Refer to "Mac OS X MIDI Settings" (p . 56) if you intend to use MIDI .
USB Driver Installation
] (power) button for several seconds to
13