Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Healthrider H35xr Bike
Summary of Contents for Healthrider H35xr Bike
- Page 5 M4 x 16mm M8 x 16mm M8 Split Screw (98)–8 M6 Washer M8 x 20mm Patch Screw Washer (61)–12 (66)–4 (60)–10 Washer (70)–2 M6 x 50mm Patch Screw (65)–4 M6 x 60mm Bolt Set (68)–1 M6 x 70mm Bolt Set (67)–1 M8 x 45mm Patch Screw (63)–2 M10 x 95mm Patch...
- Page 18 TARGET TIME DISTANCE SPEED...
- Page 22 carbohydrate calories fat calories...
Need help?
Do you have a question about the H35xr Bike and is the answer not in the manual?
Questions and answers
Belt slipping at resistance 9
To fix the belt slipping issue on the Healthrider H35xr Bike at resistance level 9, follow these steps:
1. Unplug the Power Adapter – Ensure the bike is not connected to power before making adjustments.
2. Remove Necessary Parts – Detach the right pedal by turning it counterclockwise with an adjustable wrench. Then, remove the shield cover and the right front shield.
3. Adjust the Drive Belt – Access the drive belt and make the necessary adjustment to tighten it.
4. Reassemble the Bike – Reattach the right front shield, shield cover, and right pedal.
5. Test the Bike – Plug the power adapter back in and check if the belt slipping issue is resolved.
Replace worn parts if needed to ensure proper function.
This answer is automatically generated
Can’t find the outlet for the power source on the bike