Restart Poweralert - Tripp Lite SRCOOLNET User Manual

4. Telnet/SSH Console
4.2 System Configuration

4.2.6 Restart PowerAlert

The restart menu provides the end user with an interface to restart the SNMPWEBCARD.
If there has been a setting in the data that requires a system restart, the message "Changes have been made to require a restart to take effect" will
be displayed on this menu. This message can only be cleared with a restart. Changing setting back to the original value cannot reset this condition.
Note: Not all settings that require a restart to take effect display the indicator message.
-------- Restart ---------------------------------------------------------------
Reset To Factory Settings On Restart : No
Reset To Default Users On Restart : No
1- Reset To Factory Settings On Restart
2- Reset To Default Users On Restart
3- Restart Now
X- System Menu
M- Return to Main Menu
<ENTER> Refresh Menu
>> 3
Are you sure that you want to restart now
Y- Yes, continue and perform operation
N- Do Not Make Change
>> y
Thank you for using PowerAlert. Goodbye.
Connection to host lost.
Menu Data
Reset to Factory Settings on Restart
Reset all settings to the original factory defaults except for the network settings. Since the SNMPWEBCARD has a functioning network connection
with the current configuration, the network settings are not cleared. Resetting network settings would potentially disable desired connections to the
system. If necessary, the SNMPWEBCARD network settings can be reset by clearing the Advanced Settings following a factory reset using the serial
CLI boot dialog, which is accessible as described in the SNMPWEBCARD Installation Manual.
Reset Default Users on Restart
Reset the default user settings including clearing any RADIUS settings as well. The following are cleared by this option:
• Authorization Settings for authorization and accounting both reset to LOCAL ONLY
• Removes all RADIUS Server definitions
• Resets the local users to the 5 default users, localadmin, localmanager, localguest, tripplite and public.
• Resets the Root password back to TrippLite
Restart Now
Once the request has been accepted, the card will restart after a 10-second delay.
continued
continued
68