English Safety instructions This printer has been carefully designed to give years of • Do not use the printer near water, or spill liquid safe, reliable performance. As with all electrical of any kind into it. equipment, however, there are a few basic precautions •...
Liquid has been spilled into the printer, or it has use original toner cartridges. been exposed to water. • Exercise care when removing the toner cartridge. Do not let it touch your clothing or porous mate- rials. The toner powder causes permanent stains. OKIPAGE 14ex, 14i and 14i/n...
English • Small amounts of toner spilled on skin or cloth- ing can be readily removed with soap and cold water. Using heated water will make removing the stain much more difficult. Emergency first aid • IF TONER IS SWALLOWED: Induce vomit- ing and seek medical attention.
Network Card - (14i PC or Mac; 14ex - PC only) 14i: 45 PCL fonts, 37 PostScript scalable fonts, 1 Note: The Network card for the OKIPAGE 14ex has bitmap font, OCRA and B fonts. 8MB memory on board. •...
English Unpacking After unpacking the printer and choosing a suitable Lightproof plastic bag (for storing image drum if place to put it, check that all the necessary parts are printer must be shipped). available to continue: Setup guide Printer CD-ROM containing printer drivers...
USB interface port Manual feed tray. 10. LED array. Automatic paper feed tray. 11. Image drum with toner cartridge installed. Power switch. Rear paper exit tray. Power cable connection. Optional card slot. Bi-directional parallel interface port. OKIPAGE 14ex, 14i and 14i/n...
English Setting up Before connecting this printer to a PC and power Remove the image drum (1) from the printer. supply, the toner cartridge must be installed and paper inserted in the paper tray. Protective sheet removal Remove any adhesive tape and packaging from the printer.
Remove the paper tray from the bottom of the printer and place plain paper in the tray, keeping the level of the paper in the tray below the guide marks (1). OKIPAGE 14ex, 14i and 14i/n...
English Adjust the rear paper support (2) to the size of paper you are using by lifting up and sliding Connect the other end of the parallel cable into the forwards or backwards as necessary. parallel port on the computer. Adjust the paper guides (3).
Connect the other end of the network interface cable into a network hub. Refer to the Network Administrator’s Guide that is on the CD supplied with the printer for further information on how to complete the network connection. OKIPAGE 14ex, 14i and 14i/n...
English Windows setup Printer connection A printer driver is software which runs on a computer after installation. It passes data from software programs If you are using a Parallel cable connection: and applications suitably formatted so that the printer can understand and produce a printed page(s). This printer comes with a CD-ROM that contains printer Operating System Action...
If the [Add New Hardware Wizard] window appears again, click on [Cancel] and restart the • When connecting multiple printers of the same computer. type, they appear in the print folder as *****, ***** (copy2), ***** (copy3), etc. These OKIPAGE 14ex, 14i and 14i/n...
English Configuration Add Printer Configuration Windows 95/98/2000/Me/NT4.0 - Click on If the [Add New Hardware Wizard] window appears, [Start] > [Settings] > [Printers]. follow the instructions below for “Plug-and-play Configuration”. Otherwise follow the instructions for Double click on [Add Printer] icon. “Add Printer Configuration”.
[Chooser] from the Apple menu. Note 2: Printer name is given as Object name in the self Click on the OKIPAGE 14ex (USB) icon then diagnostic test for the network interface card. select the printer name that appears in the dia- Click on [Create] and an icon should appear logue box.
English Close [Chooser]. Use the Desktop Printer Utility Note: The printer icon should appear on the desktop. Open the "Desktop Printer Utility" folder that the installer has created, and double-click on the icon Printer driver installation (14i) - USB called "Desktop Printer Utility". Select "Printer (USB)"...
You can check the version of LaserWriter by looking at the top-right corner of the print dialog. Choose the printer that is connected to your Mac and click OK. Choose File > Print, (e.g File > Print Desktop). OKIPAGE 14ex, 14i and 14i/n...
English Language When inside the printer dialog, select "Plug-in Preferences" from the dropdown list. If required, the language displayed on the liquid crystal display (LCD) can be changed as follows: Press the ON-LINE button so that the display reads OFF-LINE (Ready indicator off). Press and hold MENU 1/Menu 2 until PRINT MODE appears in the LCD.
OFF-LINE (Ready indicator off). then printed. Press the TRAY TYPE/Print Fonts button for at Note: The settings of menu items are explained in the least two seconds and the message FONTS HP User’s Guide. PCL6 is displayed. OKIPAGE 14ex, 14i and 14i/n...
Need help?
Do you have a question about the OKIPAGE 14ex and is the answer not in the manual?
Questions and answers