The C arbonation
Level isset t oLevel 2atthe factory. Ifthe sparkling
water tastes too strong or
too weak, change the carbonation
level. Level 1provides
amilder carbonation,
Level 3astronger
carbonation.
• Ifthere i sapower interruption
when t he refrigerator
ismaking sparkling
water, the refrigerator
may
re-start the carbonation
process
when p ower returns and put t oo much carbonation
into the water.
Ifthis occurs, we recommend
throwing out t he overly carbonated
water and starting the process
again.
• The lifetime ofthe CO 2cylinder can vary, depending
on the Carbonation
Levels you choose.
Turning Off the Sparkling Water Function
To turn off the Sparkling Water function, press the Cubed/Crushed
button for 3 seconds.
'_ \ Press for 3
seconds
Any sparkling water remaining in the Sparkling Water tank after you have turned off the Sparkling Water
function can still be dispensed.
Replacing a Cylinder
When the taste of sparkling water is weak or non-existent, replace the current cylinder with a new
cylinder. To replace a cylinder, follow these steps:
1. Lift up the Lever holding the cylinder in place,
2. Pull the Cylinder out of the Support,
t_
iii!;!;!!ii_!,ii/ii_iii¸li
3. Rotatethe Cylindercounterclockwise to remove it from the Regulator.
4. To installa new cylinder, follow the directions for installing a cylinder starting at Step 2 inInstallinga Cylinderinto
the Refrigeratoron pages 17 and 18.
34
operat
ng
Need help?
Do you have a question about the RF31FMEDBSR/AA and is the answer not in the manual?
Questions and answers