To Disconnect The Bluetooth Device From Hi-Fi Component; To Disconnect Hi-Fi Component From; The Bluetooth Device; Using My Karaoke - Samsung MX-FS9000 User Manual

Basic functions
• If the Bluetooth device has failed pair with the
Component, delete the previous "[Samsung] HI-Fi
XXX,VUd ' ' found by the Bluetooth device and make it
search for the component again.
5. Play music on the connected device.
• You can listen to the music playing on the connected
Bluetooth device over the Hi-Fi Component system.
• In Bluetooth mode, some model's Play/Repeat/Stop/
Next/Back functions are not available.
Tile product only supports Middle Quality SBC data (up
to 237kbps@48kHz), and does not support High Quality
SBC data (328kbps@44.1kHz).
• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports the
A2DP (AV}function.
• You cannot connect to a Bluetooth device that
supports only the HF (Hands Free)function.
• Only one Bluetooth device can be paired at a time.
• Once you have turned off Hi-FiComponent and the
pairing is disconnected, the pairing will not be restored
automatbally. To reconnect, you must pair the devbe
again.
• Search or connection may not be performed properly
by Hi-Fi Component in the following cases.
- If there is a strong electrical field around Hi-Fi
Component.
- If several Bluetooth devices are simultaneously paired
with Hi-FiComponent.
- If the Bluetooth device is turned off, not in place, or
malfunctions.
- Note that such devices as microwave ovens, wireless
LAN adaptors, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
which can cause electric interference.
To disconnect the Bluetooth device from
Hi-Fi Component
You can disconnect the Bluetooth device from Hi-
Fi Component. For instructions, see the Bluetooth
device's user manual.
• Hi-FiComponent will be disconnected.
• When Hi-Fi Component is disconnected from the Bluetooth
device, Hi-Fi Component will display DISCONNECTED ...*
READY on the front display.
To disconnect HI-FI Component from
the Bluetooth device
Press the CD/Bluetooth button on the front panel
of Hi-Fi Component to switch from Bluetooth mode
to another mode or turn off Hi-Fi Component.
• The connected Bluetooth device will wait a certain time for
a response from HI-Fi Component before terminating the
connection.(Disconnection time may differ,depending on
the Bluetooth device)
• The currently connected device will be disconnected.
In Bluetooth connection mode, the Bluetooth connection
will be lost if the distance between the Hi-Fi Component
and the Bluetooth device exceeds (5 meters).
_, If the Bluetooth device coraes back into the effective
range and then again connect after disconnecting, you
can restart to restore the pairing with the Bluetooth
device.
_, Hi-Fi Coraponent autoraatically turns off after 25
minutes in the Ready state.
You can use MY Karaoke function to sing along
with your favorite CDs and USB,
1. Connectthe microphoneto the MICjack on thefront
of the product.
,,_ Ifyour microphone jackis largerthan3.5 (0)MIC
jack,you needa Connector-Adaptor(option@ to
completethe connection.
First,connect t he Connector-Adaptor to theMICjackon
thefrontof theproduct,
Second, c onnectthemicrophone (withlarger j ack)to
theConnector-Adaptor.
2. Pressthe MIC VOL-, + button on the remote
control to adjust the volume of the microphone.
3, Pressthe MY KARAOKE buttonon the remote
control to suppressthevocalif you need.Eachtime
the buttonis pressed,thesebction is changedas
follows:
MY KARAOKEON ...*MY KARAOKEOFF
,,_ If you hear strange noises (squealing or howling)
while using the Karaoke feature, move the
microphone away from the speakers. Turning down
the microphone's volume or the speaker volume is
also effective. Do not set the MICROPHONE towards
the SPEAKER.
,,_ The microphone does not operate in the AUX and
TUNER mode.
,,_ If you connect with the Microphone, GIGA SOUND
will automatically turn off. Even if you remove the
microphone, it will not turn on.
English 13