Downloading And Installing Dymo Label Software - Dymo LabelManager Wireless PnP User Manual

Downloading and Installing DYMO Label Software

To use your label maker over a wireless network connection, you must install
DYMO Label software version 8.5 or later on each computer that needs wireless
access to the label maker.
To install the software on a Windows
Download the DYMO Label software version 8.5 or later from the Support
1
section of the DYMO Web site at www.dymo.com.
Close all open Microsoft Office applications.
2
Double-click the Installer icon.
3
After a few seconds, the installation screen appears.
Click Install and follow the instructions in the installer.
4
When the software installation is complete, you are prompted to connect your
printer.
Without connecting your printer, click Finish.
5
Double-click
6
your wireless network printer. See Adding the Label Maker as a Wireless
Printer.
To install the software on a Mac OS
Download DYMO Label software version 8.5 or later from the Support section
1
of the DYMO Web site at www.dymo.com.
Double-click the Installer icon and follow the on-screen instructions.
2
When the software installation is complete, you are prompted to connect your
printer.
Without connecting your printer, click Finish.
3
Double-click
4
your wireless network printer. See Adding the Label Maker as a Wireless
Printer.
®
16 LabelManager Wireless PnP
User Guide
system
®
on your desktop to start DYMO Label software and add
® system
on your desktop to start DYMO Label software and add