Table of Contents
Advertisement
Quick Links
ROUTER
STOCK No.57853 (230V)
PART No.R1900V
65027 (110V)
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE
THE SAFE AND EFFECTIVE USE OF THIS TOOL.
03/2001
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment,
which should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any
operation of the machine, before performing any kind of adjustment to the machine, and prior to any
maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure
both machine and operator safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation
of the machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper
Tool policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Related Manuals for Draper Router
Summary of Contents for Draper Router
-
Page 1: General Information
03/2001 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any... -
Page 2: Table Of Contents
Getting to know your router ................5 Operation and use..................6-8 Maintenance.....................9 Optional accessories ..................10 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Number:- 57853 & 65027. Part Number:- R1900V. -
Page 3: Specification/Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply
If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red). Fuse covers are available from your Draper Tools stockist. -
Page 5: General Safety Instructions
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 6: Getting To Know Your Router
GETTING TO KNOW YOUR ROUTER Fig.1 ✕✚✌ ✖✌ ✕✗✌ ✙✌ ✗✌ ✕✌ ✛✌ ✕✔✌ ✕✛✌ ✕✙✌ ✕✙✌ ✕✘✌ ✢✌ ✘✌ ✜✌ ✚✌ ✕✕✌ ✕✖✌ Draper logo 7. Depth stop 12. Screen Rating plate 8. Depth stop turret 13. Speed control On/Off switch 9. -
Page 7: Operation And Use
Fig.2 Check before plugging in that the mains voltage agrees with the voltage specified on the rating plate of the machine. Before operating the router fit the screen ✪✌ and ✪✌ dust extraction outlet ✫✌. The screen ✪✌ is ✬✌... - Page 8 (H) is disengaged from the spindle. To remove the cutter is the reverse procedure. SETTING THE DEPTH STOP The router is fitted with a depth stop screw ✳✌ Fig.6 ✻✌ that can be adjusted to the required depth and indicated on the scale ✴✌.
- Page 9 OPERATION AND USE Cont’d. PARALLEL GUIDE Fig.7 The parallel guide ✼✌ (Fig.6) can be fitted from either side of the router. When the required position is obtained the parallel guide can be ✽✌ ✽✌ secured into place by the two locking knobs ✽✌...
-
Page 10: Maintenance
WARNING – For correct tool operation always change the brushes in pairs, not separately. The use of original Draper Tool spare parts is recommended. After having fitted new brushes run the motor without load for at least five minutes for the brushes to bed in. -
Page 11: Optional Accessories
OPTIONAL ACCESSORIES Description: TCT Router Bit Set " 12 pc. Part No. DRB1 Stock No. 56834 Description: TCT Router Bit Set " 12 pc. Part No. DRB2 Stock No. 59727 Description: Spare Collets Size:6mm Stock No. 60563 Size:8mm Stock No. 60564 Size:12mm Stock No. - Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the Router and is the answer not in the manual?
Questions and answers