Port Based Vlan - TP-Link TL-SG1016DE User Manual

Note:
1. The uplink port will form several VLANs with each of the other ports. Each VLAN contains two
ports, the uplink port and one of the other ports in the switch, thus the uplink port can
communicate with any other port but other ports cannot communicate with each other.
2. For the first time the MTU VLAN mode is enabled, the switch will set port 1 as the uplink port
by default.

5.2 Port Based VLAN

On this page you can configure Port Based VLAN feature and view the related settings.
Choose the menu VLAN→Port Based VLAN to load the following page.
To ensure the normal communication of the factory switch, the default VLAN of all ports is set to
VLAN1. VLAN 1 cannot be deleted.
Figure 5-3 MTU VLAN Configuration
Figure 5-4 Port Based VLAN Configuration
24