Remote Control; Operation Instructions - Whynter ARC-110WD Instruction Manual

OPERATION INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel of the remote control.
Follow the symbol for the desired function. The functions of the unit can be controlled by the
remote control only. When using the remote control, make sure the reception of the signal is
confirmed by a beep.
NOTE:

Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.),
may cause interferences.

Electronic and fluorescent lamps may interfere with the signal transmissions between the
remote control and the air conditioner.

Remove the batteries if the remote control is not used for long periods.
REMOTE CONTROL PANEL
Power Control
Turns the unit on and off.
Fan Speed Control
Controls the 4 fan speeds: Auto, High, Medium & Low.
NOTE: Unit does not need to be vented in Fan mode.
Mode Control
Controls the 4 function modes: COOL
, FAN ONLY and AUTOMATIC
Timer / Temperature Set Control
The set temperature can be set between 61°F (16 °C)
and 89°F (32°C) by pressing the
cooling mode only.
Clock
Sets the current time.
Timer
Turns the timer function on and off.
, DEHUMIDIFY
.
Fahrenheit / Celsius Selector
Changes the display temperature from Fahrenheit to
Celsius and vice versa.
11 | P a g e
and buttons in