Application Specific Information - Motorola DCH3416 Installation Manual

4 DIAGNOSTICS
Field
Mode
Channel ID
Power Level
Symbol Rate
Known MAC
Addresses

Application Specific Information

This diagnostic displays information about application servers:
The fields are:
Field
Server# Name
Srvr # IP Addr
Description
The DOCSIS upstream channel modulation: QPSK, QAM 8, QAM 16, QAM 32, QAM
64, or QAM 128. If the value is invalid or cannot be retrieved, or if DOCSIS is not
enabled, N/A is displayed.
The upstream channel identifier 0 to 255. If the value is invalid or cannot be retrieved or
DOCSIS is not enabled, N/A is displayed.
The upstream channel power level in dBmV. If the value is invalid or cannot be
retrieved, or if DOCSIS is not enabled, 000 is displayed.
The upstream channel symbol rate in mega-symbols per second. If the value is invalid
or cannot be retrieved, or if DOCSIS is not enabled, 0.000 is displayed.
Displays up to 32 MAC addresses learned by the DCH3416 cable modem, including the
Set-Top MAC and future MAC addresses assigned by DSG, in hexadecimal format
xx:xx:xx:xx:xx:xx on two screens if necessary. If the value is invalid or cannot be
retrieved, or if DOCSIS is not enabled, no values are displayed.
Description
The application server name of up to 14 alphanumeric characters. It is blank if the
value is invalid or no value can be retrieved.
The application server's IP address in dotted-decimal format xxx.xxx.xxx.xxx; each
xxx is from 0 to 255. It is blank if the value is invalid or no value can be retrieved.
55