Changing The Frequency Steps; (Kdc-U449/ Kdc-U3049/ Kdc-U349 Only); Adjust [Settings] Mode Settings - Kenwood KDC-4051UM Instruction Manual

Table of Contents

Advertisement

Changing the frequency steps

You can change the frequency step of FM/ MW:
FM : 50 kHz to 200 kHz
MW : 9 kHz to 10 kHz
1 Press and hold
2 While pressing number buttons 1 and 5 (MEMO MY LIST), press
Release your fingers from the buttons after the display appears.
To restore the initial setting, repeat the same procedure.
When the frequency step is changed, the frequencies in the memory are deleted.

Adjust [SETTINGS] mode settings

While listening to the radio...
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4 Hold
to finish the procedure.
Item
LOCAL SEEK
ON: Searches only stations with good reception (KDC-U449/ KDC-U3049/ KDC-U349: MW/ SW1/ SW2
stations only ; KDC-4051UM: FM stations only). ; OFF *: Cancels.
Selects the tuning mode for 4 / ¢ buttons.
SEEK MODE
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
AUTO
YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing
MEMORY
is not activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 7)
MONO SET
ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).
Selects the available Program Type (page 9). Then, press 4 / ¢ to start searching.
PTY SEARCH
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
(ENGLISH */ FRENCH/ GERMAN), then press to confirm.
NEWS SET
00M – 90M: Sets the time for receiving the next news bulletin. ; OFF *: Cancels.
AF SET
ON *: Automatically searches for another station broadcasting the same program in the same Radio Data
System network with better reception when the current reception is poor. ; OFF: Cancels.
RDS REG
ON *: Switches to another station only in the specific region using the "AF" control. ; OFF: Cancels.
ATP SEEK
ON *: Automatically searches for a station with better reception when the traffic information's reception is
poor. ; OFF: Cancels.
[PTY SEARCH/ NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK] is selectable only for
KDC-4051UM.
[PTY SEARCH] is selectable only when the source is "FM."
[NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ ATP SEEK] is selectable only when the source is "FM." If other playback
source is selected, these settings are selectable under [RDS SET] item. (page 14)
8

(KDC-U449/ KDC-U3049/ KDC-U349 only)

SRC to turn off the power.
Selectable setting (Preset: *)
SRC.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-u3049Kdc-u349Kdc-u449

Table of Contents