Table of Contents
Advertisement
Dimensions for built-in area
Personal Injury/Property
Damage Hazard
@ Unit is topheavy and may tip
fonnrard when the doors are
opened.
l
A solid soffii or 2" wood block is
required above the refrigerator
to prevent tipping during use.
1 If solid soffit is more than 1 inch
above refrigerator, a wood block
must be installed on the wall not
more than l/4 inch above the
refrigerator cover.
Failure to follow these instructions
could result in personal injury or
property damage.
Width and depth of the built-in area
are determined by the type of
installation. The built-in refrigerator
can be installed with the doors flust-
with the wall, with the doors
protruding from the wall, or with sidt
panels enclosing refrigerator. Selec
one method of installation and use
the dimensions given for that
method as shown.
Height of built-in area can range from!
a minimum/of 82-l/2" to 84-3/4".
Optional top grilles may be required
for enclosures less than 83-5/8".
Height dimensions with optional top
grilles are given on page 4.
+/- 118" tolerance
I I
:Grounded electrical
outs let location
. 1
I
Wall
plumbing
loctition
1.114"
Dimensions for tippina pr
Eifxtricfd
outlet
should
be centered
within
shaded
area.
Hole for plumbing
can be cut anywhere
within
shaded
areas.
Page 3
Advertisement
Table of Contents
