Changing Settings (Custom Mode); Switching To Custom Mode; Setting Displayed Units) - Yamaha 6Y8-2819V-00 Owner's Manual

Changing settings (custom mode)/01 (setting displayed units)

Changing settings (custom mode)

Switching to custom mode

In the custom mode, you can change the
meter function settings. Each setting func-
tion number is displayed in the speedometer
display.
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. (1 second): Press to switch
between the setting function numbers
and to switch to the change settings dis-
play.

01 (setting displayed units)

(1sec.)
02 (setting fuel sensor)
(1sec.)
03 (setting correction value)
4. Change each setting and return to the
normal display. To change the settings,
see the corresponding sections for each
setting function.
NOTE:
If no operations are carried out for 30 sec-
onds or more or if the engine is started, the
settings will not be applied and the display
returns to the normal display.
01 (setting displayed units)
You can change the units that are shown in
each display. The indicator of the selected
display blinks.
1. Turn the engine off and the engine start
switch to ON.
2.
tom mode and to switch to the change
settings display.
3.
plays.
Speedometer
TRIP (trip)
FLOW (fuel flow)
ECON (fuel economy)
TTL (total fuel consumption)
TEMP
(ambient water temperature)
DPTH (depth)
(1sec.)
* In the display example, the speedometer
is shown.
24
(4 seconds): To activate the cus-
: Press to switch between the dis-
Blinks