Forward (Tiller Handle And Remote Control Models); Reverse (Automatic Reverse Lock And Power Trim And Tilt Models); Stopping Engine; Procedure - Yamaha 150 Owner's Manual

Operation
EMU27764
Forward (tiller handle and remote
control models)
Tiller handle models
1. Place the throttle grip in the fully closed
position.
2. Move the gear shift lever quickly and
firmly from neutral to forward.
Remote control models
1. Pull up the neutral interlock trigger (if
equipped) and move the remote control
lever quickly and firmly from neutral to
forward.
UP
DN
EMU27785
Reverse (automatic reverse lock and
power trim and tilt models)
EWM00190
WARNING
When operating in reverse, go slowly. Do
not open the throttle more than half. Oth-
erwise the boat could become unstable,
33
which could result in loss of control and
an accident.
Tiller handle models
1. Place the throttle grip in the fully closed
position.
2. Move the gear shift lever quickly and
firmly from neutral to reverse.
Remote control models
1. Pull up the neutral interlock trigger (if
equipped) and move the remote control
lever quickly and firmly from neutral to
reverse.
ZMU03909
EMU27820
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27844

Procedure

1. Push and hold the engine stop button or
UP
DN

Stopping engine

ZMU03909