Muddy Or Acidic Water; Anti-Fouling Paint; Motor Disposal Requirements; Emission Control Information - Yamaha 115 Owner's Manual

EMU36880

Muddy or acidic water

Yamaha strongly recommends that you have
your dealer install the optional chromium-
plated water pump kit if you use the outboard
motor in muddy or acidic water conditions.
However, depending on the model it might
not be required.
EMU36330

Anti-fouling paint

A clean hull improves boat performance. The
boat bottom should be kept as clean of ma-
rine growth as possible. If necessary, the
boat bottom can be coated with an anti-foul-
ing paint approved for your area to inhibit
marine growth.
Do not use anti-fouling paint which includes
copper or graphite. These paints can cause
more rapid engine corrosion.
EMU36340

Motor disposal requirements

Never illegally discard (dump) the motor
Yamaha recommends consulting the dealer
about discarding the motor.
EMU25221

Emission control information

EMU25230

North American models

This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines. See the label affixed to your
engine for details.
Specifications and requirements
EMU30390
Approval label of emission control certif-
icate
This label is attached to the bottom cowling.
Existing Technology; N/A
1. Approval label location
EMISSION CONTROL INFORMATION
ENGINE FAMILY :
THIS ENGINE CONFORMS TO 2001 U.S. EPA REGULATIONS FOR MARINE SI ENGINES.
REFER TO THE OWNERS MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
FELs :
SPARK PLUG :
DISPLACEMENT :
ADVERTISED POWER :
EMU25262
Manufactured date label
This label is attached to the clamp bracket or
the swivel bracket.
1
g/kW-hr
IDLE SPEED :
SPARK PLUG GAP (mm) :
3
cm FUEL : GASOLINE
kW VALVE LASH (mm) :
ZMU04619
rpm IN NEUTRAL
IN : N/A EX : N/A
ZMU05230
17