Removing The Processor Thermal-Cooling Assembly; Replacing The Processor Thermal-Cooling Assembly - Dell Vostro 1710 Service Manual

Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™ Vostro™ 1710
Service Manual
Removing the Processor Thermal-Cooling Assembly
Replacing the Processor Thermal-Cooling Assembly
Removing the Processor Thermal-Cooling Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in Before Working on Your
2. Loosen the eight screws that secure the memory cover. (See
3. Remove the memory cover and set it aside.
4. Remove the fan (see Removing the
5. In sequential order, loosen the four captive screws that secure the processor thermal-cooling assembly to the system board, and carefully lift the
processor thermal-cooling assembly out of the computer.
1 processor thermal-cooling assembly 2 captive screws (4)
Replacing the Processor Thermal-Cooling Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure
1. Align the four captive screws on the processor thermal-cooling assembly with the screw holes on the system board and tighten the screws in sequential
order.
2. Replace the fan (see Replacing the
3. Replace the memory cover and tighten the eight screws that secure the memory cover.
Back to Contents Page
Computer.
Removing a Memory Module
Fan).
Removing the Processor Thermal-Cooling
Fan).
for an illustration of the memory cover.)
Assembly.