Table of Contents
Advertisement
Self-Timer and Remote Control Modes
The self-timer and optional ML-L3 remote control (0 298) can be used to reduce
camera shake or for self-portraits.
1
Mount the camera on a tripod.
Mount the camera on a tripod or place the camera on a stable, level surface.
2
Select a release mode.
Press the release mode dial lock release and
rotate the release-mode dial to E (self-timer)
or 4 (remote control) mode.
In remote control mode, the timing of the
shutter release can be selected using the
Remote control mode option in the
shooting menu. After pressing the G
button to display the menus, highlight
Remote control mode in the shooting
menu and press 2 to display the following
options. Press the selector up or down to highlight an option and press J.
Option
% Delayed remote
Quick-response
$
remote
Remote
&
mirror-up
Shutter is released 2 s after ML-L3 shutter-release button is
pressed.
Shutter is released when ML-L3 shutter-release button is
pressed.
Press ML-L3 shutter-release button once to raise mirror, again to
release shutter and take photograph. Prevents blur caused by
camera moving when mirror is raised.
Release mode dial
G button
Description
k
85
- Quick Links:
- The Camera Body
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the D610 and is the answer not in the manual?
Questions and answers
when camera is switched off should top lcd screen be blank my screen 2.7k plus memory card icons installed two 64 g cards
No. If the Nikon D610 is turned off with a charged EN-EL15 battery and no memory card inserted, an "S" is displayed in the control panel (top LCD screen). However, if two 64GB memory cards are installed, the screen should not be blank. It should show icons indicating the presence of memory cards in the slots.
This answer is automatically generated
@Mr. Anderson
@ian madigan
HI THANKS TOP LCD SHOWS E WITH NO MEMORY CARDS INSTALLED IT SHOWS 2.7K AND MEMORY CARD ICONS WITH 2 64G CARDS INSTALLED