Understanding The Led Indicators - Intermec PF8D User Manual

Understanding the LED Indicators

PF8d/PF8t Printers User's Guide
When power to the printer to the printer is switched on, the
status LED turns green indicating that the printer is ready to
accept print commands.
If the printer runs out of media and/or ribbon during printing,
the LED glows red. Other status indicators are shown in the table
below:
LED Status Indicators
LED
Green (blinking)
Green (blinking)
Green (solid)
Green (solid)
Green (solid)
Orange (solid)
Red (blinking)
Red (blinking)
Red (solid)
Chapter 1 — Using the PF8 Printers
Meaning
Autosensing mode
Downloading font, form, or
graphic
Dump mode
Ready mode
Print mode
Boot mode
Media jam, overheated printhead or
stepper motor
Downloading firmware
Error mode
7