Table of Contents
Advertisement
Menu
Line Color
Line Bright
Pixel Zoom Setting
Line Color
3D Setting
Horopter Check
Left
Right
Capture
Load
Rename
Delete
Internal Signal
66
Function Setting Menu
Function and operation ([
Sets the boundary line color of two pictures.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan), Magenta (magenta) or Black (black).
Sets the luminance of the boundary line.
You can select from High (bright) or [Low] (dark).
Sets the pixel zoom.
Sets the boundary line color.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta) or Black (black).
Sets the mode of Horopter Check of the 3D signal analyzing function.
This item can be selected when the BKM-250TG is installed, and is available for dual-stream
HD-SDI signal input.
Changes the display mode of the left and right 3D video signals.
Selects the display mode of the left signal.
[Normal]: Normal picture
Black: Displays a black signal (the video signal is not displayed).
Mono: Displays the video signal in monochrome mode.
Red: Displays only the red component of the video signal.
Blue: Displays only the blue component of the video signal.
Selects the display mode of the right signal.
[Normal]: Normal picture
Black: Displays a black signal (the video signal is not displayed).
Mono: Displays the video signal in monochrome mode.
Red: Displays only the red component of the video signal.
Blue: Displays only the blue component of the video signal.
Captures the still picture for the standard of the color evaluation (HD Frame Capture).
Note
Use the controller with software version 1.6 or higher to use the HD Frame Capture function.
Loads the captured picture from the "Memory Stick".
When the item is selected, you can select the file name to be loaded.
Changes a file name of the captured picture in the "Memory Stick".
When the item is selected, the file names are displayed.
When the file name is selected, you can change the file name (1 to 20 characters).
Existing file name: Enter the existing file name.
New Name: Enter a new file name.
Note
The "." must not be used as the first character.
Deletes the file of the captured picture in the "Memory Stick".
When the item is selected, the file names in the "Memory Stick" are displayed.
When the file name is selected, the following message appears.
Delete this file?
OK: To delete the data, press the ENTER (Ent) button.
Cancel: To cancel, press the MENU button.
Selects the internal signal display.
You can select from PLUGE, Gray (20% gray signal), White (100% white signal), 5 step (5
step gray scale signal), Ramp, Color Bars or Black (0% black signal).
To cancel the internal signal, select one from the channel numbers 1 to 30 with the numeric
buttons of the controller.
Note
Internal Signal is not set in the following cases:
• When the HDMI/DisplayPort computer signal is input
• When Side by Side is set to On
]: factory setting)
Advertisement
Table of Contents
