Table of Contents
Advertisement
Quick Links
Boot & Glove Dryer
set uP anD oPeratinG instructions
Distributed exclusively by Harbor Freight tools
visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
save tHis manual.
©
Copyright
2009 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Four Post
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
67326
®
.
Advertisement
Table of Contents
Summary of Contents for Harbor Freight Tools Four Post Boot & Glove Dryer 67326
- Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
- Page 2 notice is used to save tHis manual address practices Keep this manual for the safety not related to personal injury. warnings and precautions, assembly, caution, without operating, inspection, maintenance and the safety alert cleaning procedures. Write the product’s symbol, is used to address serial number in the back of the manual practices not related to near the assembly diagram (or month...
- Page 3 DO NOT IMMERSE IN WATER. NE PAS IMMERGER. Maintain labels and nameplates on the tool. If unreadable or missing, contact Harbor Freight Tools for a replacement. Do not run Power Cord under carpeting. Do not cover cord with SKU 67326 For technical questions, please call 1-800-444-3353.
-
Page 4: Specifications
sPeciFications 120 V~ / 60 Hz / 230 W Electrical Requirements with heat, 30 W without heat Rocker Switch: No Heat / Heat Control Timer Switch: Knob Settings Off, variable to 3 (13) hours, with 10 minute increments, up to 180 minutes HouseHolD use only Heat... - Page 5 When the items are dry, remove set up them, unplug the unit and store in a For smaller items, place the item dry location away from children. directly over the Wind Tube (17). note: Drying time will vary depending on Pull the wrist area of gloves up over temperature and humidity.
-
Page 6: Inspection And Maintenance
insPection anD maintenance to Prevent serious injury From acciDental oPeration or electric sHock: Before appliance inspection or maintenance, make sure the cord is unplugged, and the unit has cooled completely. to Prevent serious injury From aPPliance Failure: Do not use damaged appliances. -
Page 7: Parts List
Parts list Part Description Part Description Short Tube Wire Mesh Long Tube Wind Tube Toe Support Top Stand Power Cord Bottom Stand Right Enclosure Right Plate Power Cord Connector Right Mica Plate Motor Bracket Heating Element Motor Side Mica Plate Side Plate Left Enclosure Middle Mica Plate... -
Page 8: Parts List And Assembly Diagram
Please reaD tHe FolloWinG careFully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT.
Need help?
Do you have a question about the Four Post Boot & Glove Dryer 67326 and is the answer not in the manual?
Questions and answers