Console Port And Auxiliary Port Connection Guidelines; Console Port Signals - Cisco ASR 9001-S Hardware Installation Manual

Chapter 1 Preparing for Installation
Port Name
CLUSTER Ports (0/1)
Fixed SFP+ Ports (0/1/2/3)

Console Port and Auxiliary Port Connection Guidelines

The RP has two EIA/TIA-232 (formerly RS232) serial RJ-45 connection ports (see
•
•
Note

Console Port Signals

The RP console port is an RJ-45 interface for connecting a terminal to the router. The console port does
not support modem control or hardware flow control and requires a straight-through RJ-45 cable.
Before connecting a terminal to the console port, check the terminal setting for the data transmission
rate, in bits per second (bps). The terminal transmission rate setting must match the default rate of the
RP console port, which is 115200 bps. Set the terminal to these operational values: 115200 bps, 8 data
bits, no parity, 1 stop bits (115200 8N1).
Table 1-3
Table 1-3
Console Port Pin
OL-26701-02
Table 1-2
Console port—RJ-45 interface for connecting a data terminal device to the router, which you need
to perform the initial configuration of the router.
Auxiliary port—RJ-45 interface for connecting a modem.
The console and auxiliary ports are asynchronous serial ports. Ensure that devices connected to
these ports are capable of asynchronous transmission.
lists the signals used on the RP console port.
RP Console Port Signals
Signal
1 RTS
2 —
3 TxD
4 GND
5 GND
6 RxD
7 —
8 CTS
Cisco ASR 9001 Router Front Panel Ports Description
Connector Type Description
SFP For Cascading two Cisco ASR 9001 Router systems.
The pinout and signal level is as per the SFP standard.
This supports copper/optical SFP modules.
SFP+ Fixed ports include 4X10G SFP+ ports and supports
20X1G, 4X10G and 2X10G ports through Ethernet
Plugs.
Input/Output Description
Output Request to Send
— (Not connected)
Output Transmit data
— Signal ground
— Signal ground
Input Receive data
— (Not connected)
Input Clear to Send
Cisco ASR 9001 and Cisco ASR 9001-S Routers Hardware Installation Guide
Cisco ASR 9001 Router Port Connection Guidelines
Figure 1-23):
1-23