Table of Contents
Advertisement
Connection options
A Cold water connection and
B Hot water connection (max,140 °F//60 °C)
Water drainage
Do not bend or pull the water drainage hose.
Height difference betweenthe placement area
of washer and the drainage point:
Maximum110 cm//43 inches.
Standpipe or In Wall Instalation
or Cold water connection only with Y-piece
Use the U-bracket. Attach the U-bracket to the
end of the hose and insert end of hoseinto
standpipe or wall drain.
Use a strap or cable tie connected to U-bracket
to hold hose in place.
Drainage into a siphon
Subsequent to connection:
Turn on the water taps completely, and check
connection points for water-tightness.
The connection points are under full water
pressure.Check seal with tap fully open.
Securethe connection point with a hose band
clip.
32
Hide quick links:
Advertisement
Table of Contents
