Wires For Right Ignition Module - Kenmore 146.23681310 Use & Care Manual

Wires for Right Ignition Module
• Connect the three black wires with the small tips into three of four small sockets as shown,
connect the orange side burner ignition wire with small tip into remaining small socket. See
figure B.
• Connect the large tipped orange wire into the orange marked large socket as shown. See
figure C.
• Connect the large tipped dual wire into the remaining large socket as shown. See figure D.
• Gather the six wires together and push them into the ignition wire clip to store them neatly
out of the way. See figure E.
• Unscrew the igniter cap from ignition module. Insert 1 AA battery into module with positive
/+/ facina outward. Screw ianiter can back onto module. See fiaure F.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii _
146.23681310 ° 41