Officer Set Up (1) How To Register Officers Info At The Beginning Of Shift - Panasonic Arbitrator-CP Reference Manual

Officer Set up (1) How to register Officers info at the beginning of shift?

How to register the Officers information at the beginning of the shift?
(1) Plug USB memory saved the Officer information as the file
(2) Go to "Officer"
"Management Mode" set up by Administrator
NOTE1: "Management Mode" in "Admin" menu needs to be set as "Auto", "Manual" or "List" by Administrator
(See "Admin Set up (2)")
NOTE2: "Auto" will be loaded the first 2 files in ascending order if there exists some files in USB memory.
"Manual" will be loaded the first file only in ascending order. If there are 2 officers to load, it's necessary to have 2 USB
memories.
[Top Menu]
-Officer/Admin Information Set up by Control Panel-
by Control Panel menu and Officer Data will be registered according to the
[Setup/Info]
"wid*****.txt"
Officer Info Registration according to "Management Mode"
[Auto]
"AUTO" mode is to loads the
max 2 Officer Data Files from
a USB memory automatically
[List]
"LIST" mode is to list and select
the officer data that had already
registered in VPU.
[Manual]
"MANUAL" mode is to be used
when Officer 1 and 2 data needs to
be loaded by 2 different USB
memories