Using The Scansnap In Various Ways; Scanning Only One Side Of A Document - Fujitsu Scan Snap S1300i Operator's Manual

Using the ScanSnap in Various Ways

This section explains about various ways of using the ScanSnap.

■ Scanning Only One Side of a Document

By default, the ScanSnap scans in duplex mode.
To perform simplex scanning, perform the following steps to change the setting.
1.
Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to
(page
The ScanSnap setup window appears.
2.
In the [Scanning side] pop-up menu in the [Scanning] tab, select
[Simplex Scan (Single-sided)].
3.
Click the [Apply] button in the ScanSnap setup window.
Using the ScanSnap in Various Ways (for Mac OS Users)
273).
413
"ScanSnap Manager Menu"