Setting Functions And Options - Honeywell RTH6500WF Wi-Fi Series User Manual
Wi-fi programmable thermostat wi-fi series
Hide thumbs
Also See for RTH6500WF Wi-Fi Series:
- User manual ,
- Quick start manual (25 pages) ,
- User manual (70 pages)
Table of Contents
Advertisement
Available languages
Available languages
Setting functions and options
You can change options for a number of system functions. Available functions depend on
the type of system you have. The functions, along with available options, are described on
pages 50–54.
This thermostat is pre-set for a single-stage heating/cooling system. Setting function 1 for
a heat pump will adjust the default settings.
48
69-2718ES—01
69-2718ES_A.indd 48
8/13/2012 3:01:35 PM
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the RTH6500WF Wi-Fi Series and is the answer not in the manual?
Questions and answers
Change Fahrenheit to celsius
To change the temperature display from Fahrenheit to Celsius on the Honeywell RTH6500WF Wi-Fi Series thermostat, you need to adjust the system function settings. Follow these steps:
1. Press and hold the Up and Fan buttons at the same time until the screen changes.
2. Use the Next button to navigate to Function 14 (temperature display setting).
3. Use the Up or Down buttons to select:
- 0 for Fahrenheit
- 1 for Celsius
4. Press Done to save the setting and exit.
The thermostat will now display temperatures in the selected unit.
This answer is automatically generated