Configuring Diseqc Antenna Positioner; Diseqc 1.2 Menu (Manual Positioner); Diseqc Usals Menu (Automatic Positioner); Channel Search -- Automatic Scan And Search - Manhattan Plaza ST 250 User Manual

EXAMPLE: To configure four antennas
Astra 2 (28.2E), select Antenna 1 and set DiSEqC to 1
Astra 1 (19.2E) select Antenna 2 and set DiSEqC to 2
Hotbird 1-6 (13E), select Antenna 3 and set DiSEqC to 3
Thor 2, 3 (1W), select Antenna 4 and set DiSEqC to 4
12V: To select 12 volts output for relay type LNB switch.
STORE: After above settings move to store and press OK key

CONFIGURING DiSEqC ANTENNA POSITIONER

DiSEqC 1.2 menu (Manual positioner)

With DiSEqC 1.2 antenna positioner, you can search and download individual satellites with manual positioning.
Re-sync: If you need to re-sync satellite positions, first find one satellite then move down to 'Re-sync' and press OK.
STORE: After above settings move to store and press OK key

DiSEqC USALS menu (Automatic Positioner)

You can search and download up to 40 satellites at a time automatically using the DiSEqC USALS menu.
0 Position: To move to 0 (centre) position on motor
STORE: After above settings move to store and press OK key

CHANNEL SEARCH -- Automatic Scan and Search

Search Mode: Select search option for each satellite. See below for options. Options with + D will also
include data channels
 Auto All - All TP, Video and Radio channels automatically.
 Auto All + D -All TP, Video, Radio and Data channels automatically.
 Auto FTA - All TP for Free To Air Video and Radio channels automatically
 NIT All – All TP, Video and Radio channels with Network Identification Table automatically
 NIT All + D – All TP, Video, Radio and Data channels with Network Identification Table automatically.
 NIT FTA -- All TP for Free to Air Video and Radio channels with Network Identification Table
automatically.
 TP All -- Selected TP for all Video and Radio channels. To select move to TP Data and press OK for
sub menu.
In Channel Search menu go to Positioner and select DiSEqC 1.2 and press OK
key. A sub menu will appear.
Move: Move antenna furthest possible East or West and enter the limits below.
East Limit: After furthest East enter the limit here
West Limit: After furthest West enter the limit here
Erase Limits: To clear limits press OK
0 Position: To move to 0 (centre) position on motor.
In channel search menu go to Positioner and select DiSEqC USALS and press
OK key. A sub menu will appear.
Longitude: Enter your location using 0-9 keys and then PAGE up / down keys
to enter E (East) or W (West).
Latitude: Enter your location using 0-9 keys and then PAGE up / down keys to
enter N (North) or S (South). EXAMPLE: London – Longitude = 0 and Latitude
= 51.5N
USALS: Press OK to move antenna automatically to required satellite.
Using DiSEqC USALS menu you can search and download up to 40 satellites
automatically at a time. Follow settings below.
Search Index: Set index numbers for each satellite you wish to search.
Antenna: If you are using more than one LNB, select antenna reference as
configured previously. If you are using one LNB then this may remain as 1.
Satellite: Press OK and select satellite name. Remember that you have to
select a different name for each index number.
EXAMPLE: To configure MONOBLOCK LNB
Astra 1(19.2E), select Antenna 1 and set DiSEqC to Mini-A
Hotbird 1-6(13E), select Antenna 2 and set DiSEqC to Mini-
B
7