INDEX
GENERAL SAFETY REQUIREMENTS
CONNECTORS AND DEFINITION
INTRODUCTION
Please read this manual and the following general safety requirements carefully before
installing the receiver. If you come across a word that you do not understand, please refer
to the Glossary at the end of this manual.
The Plaza DT-100 + is a high performance Digital Terrestrial Television (DTT) Receiver,
supporting various requirements of broadcast standards. This receiver includes the best
possible features together with the most up-to-date electronics hardware and easy to use
on-screen menu.
GENERAL SAFETY REQUIREMENTS
Remember that contact with 230V AC mains can be lethal or can cause severe electric
shock. To avoid this risk please follow below instructions
This product is to be operated indoors only. Do not expose the receiver to rain or
moisture.
Do not place your receiver close to sources of heat, such as heater and direct
sunlight.
Never remove the top cover of the receiver. There are no user serviceable
parts inside. Refer all servicing to qualified service agents.
Disconnect the power before connecting or disconnecting anything.
Do not place anything on your receiver that might drip or spill onto it. Never
place the product near objects filled with water.
Do not obstruct the ventilation slots of the receiver. Do not place the receiver on
soft furnishings or carpet. Maintain a free airflow around the receiver.
Do not use solvents of any kind to clean the receiver, only use a soft-dry cloth.
CONNECTORS AND DEFINITIONS
Please do not connect power to the receiver until all other connections have been made.
C2: ANT LOOP IN TV aerial input to modulator. See diagram below.
C3: VIDEO Composite video output to connect to TV or AV monitor etc.
2
3
Program Guide)
3
3
4
5
5
5
6
8
C1: TO TV Connect this output to UHF
input of yourTV. This will allow you to
tune your TV to analogue terrestrial
programs as well as to use the built-in
modulator for viewing the digital
terrestrial programs.
8
9
10
11
11
11
13
13
16
2
Need help?
Do you have a question about the Plaza DT-100+ and is the answer not in the manual?
Questions and answers