Show Commands - Alcatel-Lucent 7750 SR OS Configuration Manual

Show Commands

aggregate
Syntax aggregate [family][active]
Context show>router
Description
This command displays aggregate routes.
Parameters
family — Specifies to display IPv4 or IPv6 aggregate routes.
active — When the active keyword is specified, inactive aggregates are filtered out.
arp
Syntax arp [ip-int-name | ip-address/mask | mac ieee-mac-address | summary] [local | dynamic |
static | managed]
Context show>router
Description This command displays the router ARP table sorted by IP address.
If no command line options are specified, all ARP entries are displayed.
Parameters ip-address/mask — Only displays ARP entries associated with the specified IP address and mask.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
summary — Displays an abbreviate list of ARP entries.
[local | dynamic | static | managed] — Only displays ARP information associated with the specified
Output ARP Table Output — The following table describes the ARP table output fields:
IP Address
MAC Address
Expiry
7750 SR OS Router Configuration Guide
Values
ipv4, ipv6
keyword.
Label
The IP address of the ARP entry.
The MAC address of the ARP entry.
The age of the ARP entry.
IP Router Configuration
Description
Page 123