Advertisement
There is one LED on the bracket to indicate the link status.
LED color : Green
LED "ON" : the 10Base-T link connection is successful.
LED "OFF" : the 10Base-T link is NOT successful
Remote boot ROM socket: their is a ROM socket on this adapter card to
support remote boot ROM.
2. Quick Installing Guide
Follow these steps to install the card:
1. Power off PC & remove cover.
2. Plug in adapter card & connect cable to BNC or RJ-45.
3. Replace the cover & Power on PC
4. Check the system's BIOS setup. Configure the
appropriate PCI setting.
5. Reset PC & configure your network system.
Advertisement
