Page 1
INSTRUCCIONES EN ESPAÑOL INCLUIDAS. (20 inch) If you need additional operating assistance after reading this owner’s manual or to order replacement accessories, please call TOLL FREE : 1-800-518-1180. Or visit our WEB SITE at http://www.funai-corp.com Please read before using this equipment...
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Page 3
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE NEC - NATI O NAL EL ECTRI CAL CO DE S2 8 9 8 A 13. Outdoor Antenna grounding - If an outside antenna or cable system is connected to the unit, be sure the anten- na or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public perfor- mance and lending of discs are prohibited. This product incorporates copyright protection tech- nology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise autho- rized by Macrovision.
LOCATION For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. •...
TV Mode • Infrared remote control • Trilingual on screen TV setup display selectable in English, Spanish or French • 181 channel capability PLL frequency synthesiz- er tuner with direct station call be necessary to view scrambled cable channels.) • You may view special- Closed Caption Decoder –...
OPERATING CONTROLS AND FUNCTIONS - FRONT PANEL - [Fig.1] - REMOTE CONTROL - [Fig. 2] POWER PICTURE SELECT +100 SLEEP SKIP ZOOM PLAY STOP PAUSE SLOW DISPLAY ENTER SETUP TITLE CLEAR SEARCH MODE REPEAT AUDIO SUBTITLE MODE Disc loading tray VIDEO input Jack Connect to the video output jack of a video camera or VCR.
Page 9
- REAR PANEL - [Fig.3] COAXIAL TITLE Button [P.20] Displays the title menu. CLEAR Button [P.22] Press to clear or cancel a setting currently entered. MODE Button [P.23. 24, 25] Press to call up the program screen or the ran- dom screen in the stop mode.
ANTENNA/CABLE CONNECTIONS Plug the incoming cable into the ANT. jack on the rear of the unit. If your cable service supplies you with a converter box or if you use a satellite system, connect the box with this unit as shown below. Cable Antenna TV signal...
CONNECTING TO FRONT A/V INPUT JACKS When you watch a program recorded on another source (VCR or video camera), use the AUDIO/VIDEO input jacks on the front of the unit. Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO jacks of this unit.
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its COAXIAL jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.
TV OPERATION AND SETTINGS WATCHING A TV PROGRAM Plug in the unit power cord Plug the unit power cord into a standard AC outlet. NOTE: • If any digits appear in the corner of the screen, press [POWER] without unplugging the power cord. Turn on the unit Press [POWER] to turn on the unit.
SLEEP TIMER The Sleep Timer function turns off the unit without using [POWER] after a desired period of time. Call up the Sleep Timer Setting Press [SLEEP] so that “SLEEP 0 MINUTE” appears. Set sleep time Press [SLEEP] repeatedly until your desired sleep time appears.
CHANNEL SET UP Make sure ... • The unit must be turned on. AUTO CHANNEL PROGRAMMING As the initial setting, this unit has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory.
V-CHIP SET UP This feature enables parents to prevent their children from watching inappropriate material on TV. When you try to access a program which is blocked, “PROTECTED PROGRAM by ...” message appears on the TV screen. V-CHIP SET UP Make sure ...
MPAA RATING SET UP Follow steps 1 to 3 in the “V-CHIP SET UP” sec- tion on page 16. Select your desired item Press [ K K / L L ] to point to your desired item, then press [ENTER] to select [BLOCK] or [VIEW].
CABLE CHANNEL DESIGNATIONS If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations. CATV channel TV Display CATV channel...
Playable Mark (logo) discs DVD-Video * 1,2,4,6,10,11 DVD-RW DVD-R * 1,3,4,5,6 7,9,10 DVD+RW DVD+R * 1,3,4,5,6,8,9,10 Audio CD * 4,6,10 CD-RW CD-R * 4,5,6,9,10 is a trademark of DVD Format/Logo Licensing Corporation. If you cannot play back a disc which bears one of the marks above, check the following notes. *1: This unit conforms to the NTSC color system.
BASIC PLAYBACK Getting started ¡ Turn on the power of amplifier and any other com- ponents, if necessary. Press [POWER]. ¡ The power will turn on. Press [OPEN/CLOSE A] to open disc load- ing tray. Place the chosen disc in the tray, with the label facing up.
RESUME During playback, press [STOP C]. ¡ Resume message will appear on the TV screen. Press [PLAY O], playback will resume from the point at which playback was stopped. ¡ To cancel resume, press [STOP C] twice. ¡ The resume information stays on even when the power is turned off.
TRACK SEARCH There are three ways to begin playback on an Audio CD at a specific track. Using the Number buttons Press the Number buttons to enter the desired track number. ¡ Playback will start at the selected track. ¡ For single digit tracks (1-9), press a single number (eg.
SPECIAL PLAYBACK FUNCTION REPEAT REPEAT is available only during playback. REPEAT TITLE / CHAPTER To activate the repeat function, press [REPEAT] during playback. ¡ The repeat mode changes as described below every time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) NOTES: ¡...
CHANGING THE SETTINGS SUBTITLE LANGUAGE The unit allows you to select a language for subtitles during DVD disc (if available) playback. Press [SUBTITLE] during playback. ¡ The subtitle language will appear on the display bar at the top of the TV screen. Press [SUBTITLE] repeatedly to select your desired subtitle language.
VIRTUAL SURROUND You can enjoy surround-sound effect over two speak- ers on this unit. Press [MODE] twice (CD: once) during play- back. Press [ENTER] to set it “1” (Natural effect), “2” (Emphasized effect) or “OFF”. Press [MODE] to exit. ¡ You can also exit the menu by pressing [RETURN].
CHANGING THE DVD SET UP ITEMS CUSTOM MENU You can change the DVD player’s settings. Press [SETUP] twice in the stop mode so that the DVD SETUP menu appears. ¡ Press [L] to select “CUSTOM” then press [ENTER]. NOTE: ¡ If the menu does not appear, press [PLAY O] first, then press [STOP C].
DISPLAY SETTING Follow steps 1 to 2 in the “CUSTOM MENU” sec- tion on page 26. K K / L L Press [ ] to select the below items then press [ENTER]. QUICK TV MODE: You can change certain aspects of the DVD display screens and on-screen messages on the TV screen.
PARENTAL CONTROL Parental Control limits the disc viewing that exceed your setting (with a password or playback will stop). This feature allows you to prevent discs with alterna- tive scenes from being played by your children. PARENTAL LEVEL Parental Level allows you to set the rating level of your DVD discs.
TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con- sulting the following checklist. PROBLEM No power No operation by infrared remote control TV Mode Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities.
Page 30
PROBLEM Picture OK, Sound Poor No operation by infrared remote control Different color marks on screen CLOSED CAPTION PROBLEM Misspelling in captions Text is not shown in its entirety or a delay occurs from what is being said Captions scrambled with white boxes No captions in a program which must contain closed caption...
DVD Mode PROBLEM No picture Disc cannot be played No sound No DTS audio is output Distorted picture Audio or subtitle language does not match the set up The camera angle cannot be changed Audio or subtitle language cannot be changed “Prohibited icon”...
CABINET CLEANING • Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed sur- faces.
27. Botón RETURN Permite volver a la pantalla anterior en el menú de configuración. 28. Botón ENTER Presione para establecer un ajuste. 29. Botones / { / B Modo TV: Presione para seleccionar un modo de ajuste en el menú que aparece en la pantalla del televisor. Presiónelos también para seleccionar opciones o establecer ajustes en un menú...
Page 36
CONEXIÓN A TOMAS DE ENTRADA DELANTERAS Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice las tomas de entrada AUDIO/VIDEO de la parte delantera de la unidad. Conecte las tomas de salida de audio/vídeo de otra fuente a las tomas AUDIO L/R y VIDEO de esta unidad.
PARA MIRAR UN PROGRAMA DE TV Enchufe el cable eléctrico Enchufe el cable eléctrico de la unidad en un tomacorriente de CA del hogar. NOTA: • Si aparecen números en la esquina de la pantalla, presione [POWER] sin desenchufar el cable eléctrico.
REPRODUCCIÓN BÁSICA Para empezar ¡ Conecte la alimentación del amplificador y otros componentes, si es necesario. Presione [POWER]. ¡ La alimentación se conectará. Presione [OPEN/CLOSE A] para abrir la bandeja de carga del disco. Ponga el disco deseado en la bandeja, con la etiqueta hacia arriba.
FUNAI CORP. will repair this SV2000 product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.
Need help?
Do you have a question about the WV20D5 and is the answer not in the manual?
Questions and answers