GE JGP628 Installation Instructions Manual page 10

Installation Instructions
Cooktop Burners
Assembling the Cooktop Burners
I The electrode of the spark igniter is exposed. Be careful not to push any cooktop controls while
the top of the burner is removed. Do not remove the top or touch the electrode of any burner while
another burner is turned on. Electrical shock might result.
For Porcelain Cooktops
a. Place the burner head on the burner base, so
that the pins match up with the slots on the
base.
b. Position the burner cap on the burner head.
c. Place the burner grate over the burner
assembly on the porcelain units. The bottoms
of the burner grates have feet that fit into
corresponding indentations in the cooktop.
For Glass Ceramic Cooktops
a. Place the burner head on the burner base, so
that the pins match up with the slots on the
base.
b. Position the burner cap on the burner head.
c. Place the burner grate over the burner
assembly on the porcelain units. The grates
fit over the raised area on the burner head.
BURNER
GRATE _'_i_
BURNER
_
CAP_
BURNER
10