1 right hinge cover
2 left hinge cover
Palm Rest
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read
"Preparing to Work Inside the
1. Remove the
hard
drive.
2. Remove the keyboard.
NOTICE:
You must remove the display assembly before you remove the palm rest; the display hinges pass through the back of the palm rest.
3. Remove the
display assembly
4. Turn the computer over and remove the three M2.5 x 12-mm screws labeled "circle P."
Computer" before performing the following procedure.
and
hinge
covers.