Removing The Keyboard; Replacing The Keyboard - Dell Vostro 1700 Service Manual

Back to Contents Page
Keyboard
Dell™ Vostro™ 1700 and Inspiron™ 1720/1721 Service Manual
Removing the Keyboard
Replacing the Keyboard
For more information about the keyboard, see "Using the Keyboard and Touchpad" in your Owner's Manual.
Removing the Keyboard
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1. Follow the procedures in Before You
2. Remove the hinge cover (see
3. Remove the four M2 x 3-mm screws at the top of the keyboard.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the
keyboard.
4. Slide the keyboard toward the back of the computer to disengage the notch on the keyboard from the tab on the palm rest.
5. Lift and remove the keyboard.
1 keyboard
3 notch on keyboard
Replacing the Keyboard
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1. Follow the procedures in Before You
2. Insert the six tabs and keyboard connector along the front edge of the keyboard beneath the front-inside edge of the palm rest.
3. Align the notch at the top of the keyboard with the tab on the palm rest, and then lower the keyboard into place.
4. Applying even pressure to keep the keyboard flat, slide the keyboard towards the front of the computer to connect the keyboard connector and secure
the six tabs along the front edge of the keyboard beneath the front- inside edge of the palm rest. Ensure that the tab on the palm rest slides into the
notch at the top of the keyboard.
Begin.
Removing the Hinge Cover).
2 M2 x 3-mm screws (4)
4 tab on palm rest
Begin.