Dell Latitude C400 Service Manual page 49

System Board : Dell Latitude C400 Service Manual
1 fan
2 reserve battery cable
3 connector for fan extender cable
4 hard-drive connector
5 M2 x 4-mm screw (1)
6 memory module socket
7 guide pins (2)
8 5-mm hex nuts (4)
9 7-mm hex nuts (2)
10. Remove the four 5-mm hex nuts near each end of the serial and video connectors.
11. Use a flat-blade screwdriver to remove the two 7-mm hex nuts near each end of the docking
connector.
12. Remove the two guide pins from the IDE connector.
13. Disconnect the cooling fan from the fan extender cable.
14. Disconnect the fan extender cable from the connector beside the internal memory socket.
15. Disconnect the reserve battery cable from the system board.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/C400/C400_SERVICE_MANUAL/sysboard.htm (2 of 3)6/21/2004 1:20:17 AM