Front Panel - Sony XDS-1000 Operation Manual

Names and Functions of
Parts

Front Panel

The names and symbols of buttons and knobs on the front
panel are color coded according to function.
White: Function when the button or knob is operated
independently.
1 PHONES jack
2 LEVEL adjustment knob
3 On/standby (1) button and indicator
4 ALARM indicator
8 KEY INHI switch
3 Audio level adjustment section (see page 17)
a PHONES jack
This is a standard stereo jack. Connect stereo headphones
to monitor the audio during recording and playback. (Non-
audio signals are muted.) The monitored channel is
selected with MONITR L and MONITR R on the HOME
page of the function menu (see page 41).
5 INTERNAL ACCESS indicator
6 MAINTENANCE connector
4 Display/menu control
section (see page 18)
Chapter
Orange: Function when the button is operated with the
SHIFT button held down.
Blue: Function related to thumbnail operations.
7 REMOTE button
1 Port and media selection section (see page 16)
2 Memory card slots (see page 17)
6 Shuttle/jog/variable-speed playback
control section (see page 19)
5 Recording and playback control section (see page 19)
b LEVEL (volume) adjustment knob
Adjust the volume of headphones with this knob. You can
also cause this knob to simultaneously adjust the output
volume from the AUDIO MONITOR OUTPUT R, L
connectors on the rear panel. To do this, set setup menu
item 114 AUDIO MONITOR OUTPUT LEVEL to
"variable".
2
15
Front Panel