Knee Off unchecked
Knee Off checked
Operations in the draw zone in Parameter Edit mode
Base Curve: Select the basic
characteristics for the base curve.
You can directly
enter numeric
values.
Gain: You can create a curve by
decreasing the total gain from the
base curve.
Set the white clip level to determine the upper limit of the white level.
Adjust the initial gain (slant) that determines the characteristics of black parts.
Adjust the middle tone.
Adjust the black level.
Camera Black 0 (zero)
When the black level is set for the gamma, the master
black value of the camera must be set to 0. By turning this
option ON, the camera's master black is fixed to 0.
Turn this option OFF if you set the master black on the
camera.
Note
The black value is set to 0 on the F23/F35 cameras, and
the black offset value is included in the built-in gamma
curve. It is recommended to turn this option ON when
using the gamma on an F23/F35.
e Draw zone
You can change the setting by directly dragging the icon
on the graph with the mouse or moving it with the arrow
keys.
Adjust the dynamic range.
Functions and Operations of the Component Windows
17