Basic Operation Methods For Scanning; Scanning Using Keys On The Operation Panel - Canon Color imageCLASS MF8380Cdw Basic Operation Manual

Basic Operation Methods for Scanning

Scanning Using Keys on the Operation
Panel
You can scan a document using the keys on the operation
panel.
NOTE
Using the shortcut keys
The shortcut keys allow you to register your computer and send
your scans to it with only a few steps. For details, see "Performing a
Scan Using a Shortcut Key" in the e-Manual.
To scan using the shortcut keys
When using the shortcut keys which are registered destinations
etc., you can send the documents by scanning with onetouch.
See "Scanning" in the e-Manual.
To scan documents by operating a computer
See "Scan" in the e-Manual.
Keys to be used for this operation
1
Place your document.
"Loading Paper" (→P.2-9)
"Supported Document Types" (→P.2-2)
2
Press [
3
Select <Computer> using [ ] or [ ] and press
[OK].
Select the scan type.
Computer
Remote Scanner
Memory Media
7-2
SCAN
OK
].
4
Select the destination using [ ] or [ ] and press
[OK].
Specify destination.
EXAMPLE1
EXAMPLE2
• When one computer is connected to the machine via a USB
cable:
This screen is not displayed.
• When more than ten computers are connected to the machine
simultaneously.
• Up to 10 computers can be displayed as a list of computers
connected to the machine. (Scanning cannot be performed
otherwise. Reduce the number of computers connected to the
machine over the network.)
"Registering the Scanner in MF Network Scan Utility"
5
Specify the scan settings using [ ] or [ ] and
press [OK].
Select Scan Type
Scan: Press OK
Color Scan
B&W Scan
Custom 1
The scanner settings are specified by default as follows.
Scan
Resolution
Mode
Color Scan Color 300 dpi
Black and
B&W Scan 300 dpi
White
Custom 1 Color 300 dpi
Custom 2 Color 300 dpi
Scanning starts.
File PDF
Type Settings
Searchable/
PDF
Standard
TIFF -
JPEG/
-
Exif
Searchable/
PDF
Standard