Pick Up Gear Ass'y & Solenoids; Exit Roller - Dell 1815 Mono Laser Service Manual

5.24 Pick Up Gear Ass'y & Solenoids
1. Before you remove the Pick Up Gear Ass'y &
Solenoids, you should remove:
- Duplex Guide Housing (Refer to 5.18)
- Feed Bracket Unit (Refer to 5.23.5)
2. Release the Pick Up Gear Ass'y and Pick Up Gear
Shaft, as shown below.
Pick Up Gear Ass'y
Pick Up Gear Shaft

5.25 Exit Roller

1. Before you remove the Exit Roller, you should
remove:
- Fuser Drive Ass'y (Refer to 5.15)
- Middle Cover Ass'y (Refer to 5.20)
3. Remove the two screws securing the Manual
Solenoid and Feed Solenoid and then remove the
Solenoids, as shown below.
Feed Solenoid
Manual Solenoid
2. Remove the Exit Gear, and release the Bearing at
one end then remove the Roller Exit F/Down and Exit
Roller Rack, as shown below.
Bearing
Exit Roller Rack
1
1
2
Precautions
Roller Exit F/Down
Exit Gear
Service Manual
5-33