Recording The Left And Right Parts Together; (Setting A Split Point) - Yamaha DGT7A Advanced Operation Manual

5
When you finish playing the
second part, press [STOP].
The following display appears.
The following table gives a description of
each of the options.
Option Description
SAVE The second part is saved with
the first part under the current
song number.
NEW The second part is saved under
a new song number. The first
part is kept under the previous
song number.
CANCEL The second part is discarded.
The first part is kept under the
previous song number.
6
Use [<] and [>] to select an
option, then press [ENTER].
The second L/R part is saved as indicated
or canceled.
Recording the Left and
Right Parts Together

(Setting a Split Point)

You can also record an L/R song by playing the
left- and right-hand parts simultaneously. In this
case, a keyboard split point is set, and the notes
played on the left-hand side of the split point are
saved as the left-hand part, and notes played on
the right-hand side of the split point are saved as
the right-hand part.
1
Specify a disk.
Note: If you are recording to a floppy disk,
make sure that the disk's erasure
protection tab is set to "unprotected."
2
Press [REC] to engage the Record
Standby mode.
The REC indicator lights and the
PLAY/PAUSE indicator flashes.
A new song number is created for the new
recording. For example, if the last song to
be recorded was No. 6, then the new song
will be No. 7.
You can title your new recording either now
or after recording. In either case, see "Song
Titling and Title Editing" on page 22.
If you want to record your L/R song using
the metronome, see "Recording with the
Metronome" on page 24.
If you want to record a pedal count-in, see
"Recording a Pedal Count-In" on page 34.
3
Press both [PART L] and [PART R]
buttons so that both indicators
light red.
31