Table of Contents
Advertisement
(13)
Paper jam not yet recovered.
(14)
A device fault has been detected. (The fault has already been reported by the last
CLEAR or READ commands.)
(15)
Return operation was completed normally.
6.7
Command/Response Timing Chart
These timing charts are in the normal sequence at connector pins of the scanner. In
these charts, STB, PB, and SPB mean start bit, parity bit, and stop bit respectively.
Figures 6.5 to 6.10 show the timing chart for each command.
Figure 6.5
Figure 6.6
Figure 6.7
Figure 6.8
Figure 6.9
Figure 6.10
CLEAR command sequence
CONTROL command sequence
START command sequence
READ command sequence
SENSE command sequence
RETURN SENSE command sequence
50FH5037E>02
6 $ 67
Advertisement
Table of Contents
