Fujitsu 8000 SERIES User Manual page 51

Installing memory modules
1 Disconnect the power plug from the outlet.
2 Remove the side cover.
Confirm that the memory power LED is off. If the memory power LED is on, disconnect the
power cable from your PC before preceeding.
3 Remove the bracke.
4 Remove the duct.
Remove the two screws.
5 Open the hook on both sides of the slot outward to remove the memory module.
Point
• Do not open the hooks too violently. Otherwise, the memory module may jump out of the slot
and become faulty.
• Keep the removed continuity module in a safe place.
41