Viewing The Team Properties And Statistics - Fujitsu BX600 User Manual

8
Click one of the listed team members, click "Edit Member IP
Address", type the member IP address in the "IP Address" box,
and then click [OK].
9
Repeat step 8 for each of the other listed team members.
10
Click [Apply].

Viewing the Team Properties and Statistics

The following shows how to view the team properties and statistics.
1
Click the name of the newly created team.
2
Click the "Statistics" tab to view the team statistics.
Saving and Restoring a Configuration
The following shows how to save a configuration.
1
Click the "File" menu → "Team Save As".
2
Type the path and file name of the new configuration file, and then
click "Save".
A .bcg extension is added. The configuration file is a text file that can be viewed by any text
editor. The file contains information about both the adapter and the team configuration.
The following shows how to restore a configuration.
1
Click the "File" menu → "Team Restore".
2
Click the name of the file to be restored, and then click [Open].
3
Click [Apply].
4
Click [Yes] when the message is displayed indicating that the
network connection will be temporarily interrupted.
If a configuration is already loaded, a message is displayed that asks if you want to save your
current configuration.
Click [Yes] to save the current configuration. Otherwise, the configuration data that is
currently loaded is lost.
194
All of the member IP addresses must be in the same subnet as the subnet for the
probe targets.
If necessary, go to the folder where the file is located.