Dell PowerVault DX6112 Owner's Manual page 55

Table 3. Supported Expansion Cards
Riser PCIe Slot
1 1
1 2
1 3
2 4
2 5
3 (default) 6
3 (default) 7
3 (alternate) 6
NOTE: To use PCIe slots 1 through 4 on the riser, both the processors must be installed.
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The
expansion cards with the highest priority should be installed first using the slot priority indicated. All other expansion
cards should be installed in card priority and slot priority order.
Table 4. Expansion Card Installation Order
Card Priority Card Type
1 Dell PowerEdge Express Flash
(PCIe SSD) Bridge
2 GPU (single wide)
GPU (double wide)
3 GPU Host Interface Card (HIC)
4 RAID H710P
5 Converged Network Adapters
(CNAs)
6 10 Gb NICs
7 FC4/8 HBA
8 1 Gb NICs
9 Non-RAID
Processor Connection Height
Processor 2 Low Profile
Processor 2 Low Profile
Processor 2 Low Profile
Processor 2 Standard Height
Processor 1 Standard Height
Processor 1 Standard Height
Processor 1 Standard Height
Processor 1 Standard Height
Length
Half Length
Half Length
Half Length
Full Length
Full Length
Full Length
Full Length
Full Length
Slot Priority
Not Supported
Not Supported
Not Supported
Not Supported
Not Supported
4, 6, 5
4, 6, 5
4, 6, 5
2, 3, 1
4, 6, 5
2, 3, 1
4, 6, 5
2, 3, 1
Link Width Slot Width
x8 x16
x8 x16
x8 x16
x16 x16
x8 x16
x8 x16
x8 x16
x16 x16
Max Allowed
1
4
2
2
1
4
4
4
4
4
55