Bios Setup Security Jumper Settings - Intel DH87MC Specification

Table 32. BIOS Setup Security Jumper Settings
Function/Mode Jumper Setting
Normal 1-2
Lockdown 2-3
Configuration None
Mode
Configuration
The BIOS uses current configuration information and passwords
for booting.
The BIOS uses current configuration information and passwords
for booting, except:
• All POST Hotkeys are suppressed (prompts are not displayed
and keys are not accepted. For example, F2 for Setup, F10 for
the Boot Menu).
• Power Button Menu is not available (see Section 3.9.3 Power
Button Menu).
BIOS updates are not available except for automatic Recovery
due to flash corruption.
BIOS Recovery Update process if a matching *.bio file is found.
Recovery Update can be cancelled by pressing the Esc key.
If the Recovery Update was cancelled or a matching *.bio file
was not found, a Config Menu will be displayed. The Config Menu
consists of the following (followed by the Power Button Menu
selections):
[1] Suppress this menu until the BIOS Security Jumper is
replaced.
[2] Clear BIOS User and Supervisor Passwords.
[3] Reset Intel AMT to default factory settings.
[4] Clear Trusted Platform Module.
See Section 3.9.3 Power Button Menu.
Technical Reference
55